HPI RS4 Sport 3 Flux With Falken Porsche 911 GT3 R Body

  • £289.00 inc VAT

  • £329.99 save £40.99
  • £289.00 inc VAT

  • £329.99 save £40.99
Includes Free UK Delivery
FROM JUST £289.00 PER MONTH Show Finance Options
Includes Free UK delivery

The RS4 Sport 3 is the all-new on-road chassis from HPI Racing! It features a sealed and efficient shaft drivetrain, which means the drivetrain is protected from stones and dirt. The RS4 Sport 3 Flux is equipped with a high performance brushless electronic speed controller and motor, capable of insane speeds of 70+ MPH!

HPI RS4 Sport 3 Flux With Falken Porche 911 GT3 R Body

This car features the #17 Porsche 911 GT3 RSR driven by Bryan Sellers, Wolf Henzler and Nick Tandy for the Falken Tire team. The iconic shape of the Porsche 911 combined with the cool 'urban camo' look and stylized shark-mouth make for the perfect head-turning look for the fastest version of the all-new RS4 Sport 3. Finishing the car is a set of extra-wide replica BBS wheels fitted with replica slick Falken Azenis tires!

HPI Flux Technology

What sets apart the RS4 Sport 3 Flux from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The RS4 Sport 3 Flux is fitted with the awesome Flux MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust Flux EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a Dean's plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!

Please note, to achieve 70mph you will need the 114569 - HIGH SPEED GEAR SET and 106401 - PLAZMA 11.1V 3200mAh 35C LiPo Battery Pack

One-Piece Molded Chassis

The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

Customise Your Look

You can fit any 1/10th scale touring car body from HPI Racing onto the RS4 Sport 3, from hot hatches to supercars, pick-up trucks to supertouring racers. All you need to do is adjust the body mounts front and rear to allow the wheels to fit underneath the body properly. A simple system using body pins hold the mounts in place, and you can fine-tune the fit to get the exact ride height you want.

Click here to see our full selection of body shells

Low Profile Layout Design

One of the ways HPI gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.

Description

The RS4 Sport 3 is the all-new on-road chassis from HPI Racing! It features a sealed and efficient shaft drivetrain, which means the drivetrain is protected from stones and dirt. The RS4 Sport 3 Flux is equipped with a high performance brushless electronic speed controller and motor, capable of insane speeds of 70+ MPH!

HPI RS4 Sport 3 Flux With Falken Porche 911 GT3 R Body

This car features the #17 Porsche 911 GT3 RSR driven by Bryan Sellers, Wolf Henzler and Nick Tandy for the Falken Tire team. The iconic shape of the Porsche 911 combined with the cool 'urban camo' look and stylized shark-mouth make for the perfect head-turning look for the fastest version of the all-new RS4 Sport 3. Finishing the car is a set of extra-wide replica BBS wheels fitted with replica slick Falken Azenis tires!

HPI Flux Technology

What sets apart the RS4 Sport 3 Flux from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The RS4 Sport 3 Flux is fitted with the awesome Flux MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust Flux EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a Dean's plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!

Please note, to achieve 70mph you will need the 114569 - HIGH SPEED GEAR SET and 106401 - PLAZMA 11.1V 3200mAh 35C LiPo Battery Pack

One-Piece Molded Chassis

The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

Customise Your Look

You can fit any 1/10th scale touring car body from HPI Racing onto the RS4 Sport 3, from hot hatches to supercars, pick-up trucks to supertouring racers. All you need to do is adjust the body mounts front and rear to allow the wheels to fit underneath the body properly. A simple system using body pins hold the mounts in place, and you can fine-tune the fit to get the exact ride height you want.

Click here to see our full selection of body shells

Low Profile Layout Design

One of the ways HPI gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.

In The Box / Required

In the Box

  • RS4 Sport 3 Chassis
  • Falken Porche 911 GT3 R Body Shell
  • Transmitter

Required to Run

  • Battery Pack
  • Charger

Specification

Filters
  • Assembly
    RTR (Ready to Run)
  • Power
    Brushless
  • Scale
    1/10
  • Drive
    4WD

FAQ

Reviews (0)

Write a review

Rate product out of 5

Spare Parts

Compatible Hop-Ups

Q & A

Be the first to ask a question.