Absima 1/10 EP Sand Buggy ASB1 4WD RTR

  • £139.00 inc VAT

  • £159.62 save £20.62
  • £139.00 inc VAT

  • £159.62 save £20.62
Includes Free UK Delivery
FINANCE AVAILABLE FOR ORDERS OVER £280 Show Finance Options
Includes Free UK delivery

The Absima ASB1 1/10th 4wd sand buggy is a high quality and robust model for beginners, The ASB1 comes with a powerful 550 15t motor which get speeds of up to 40km/h.

Along with an extremely robust chassis and reliable 4WD drivetrain you can conquer any type of terrain. The ASB1 also has a water resistant speed controller, servo and a dust cover to protect the electrical components and battery. The ASB1 Is ready to run and comes with a 2.4ghz transmitter, 7.2v battery pack and charger.

The aluminium engine mount, upper deck, brace mount and roll cage make for a durable chassis, The ABS1 also has adjustable oil shocks and comes with a pre-designed body with a  camouflage look.

Features

  • Water resistant LiPo compatible 40A brushed ESC with Tamiya plug
  • Powerful 4Kg steering servo
  • 2,4Ghz CR2S V.2 radio control incl. receiver
  • Adjustable oil shocks
  • Ball bearing transmission
  • CVD steel shafts
  • Gear differentials front & rear
  • Aluminum engine mount
  • Complete covered transmission
  • CVD steel shafts on front axle
  • Complete adjustable turnbuckles
  • Aluminum upper deck
  • Servo saver
  • Printed camouflage body
  • Charger and NiMH Racing Pack included

Description

The Absima ASB1 1/10th 4wd sand buggy is a high quality and robust model for beginners, The ASB1 comes with a powerful 550 15t motor which get speeds of up to 40km/h.

Along with an extremely robust chassis and reliable 4WD drivetrain you can conquer any type of terrain. The ASB1 also has a water resistant speed controller, servo and a dust cover to protect the electrical components and battery. The ASB1 Is ready to run and comes with a 2.4ghz transmitter, 7.2v battery pack and charger.

The aluminium engine mount, upper deck, brace mount and roll cage make for a durable chassis, The ABS1 also has adjustable oil shocks and comes with a pre-designed body with a  camouflage look.

Features

  • Water resistant LiPo compatible 40A brushed ESC with Tamiya plug
  • Powerful 4Kg steering servo
  • 2,4Ghz CR2S V.2 radio control incl. receiver
  • Adjustable oil shocks
  • Ball bearing transmission
  • CVD steel shafts
  • Gear differentials front & rear
  • Aluminum engine mount
  • Complete covered transmission
  • CVD steel shafts on front axle
  • Complete adjustable turnbuckles
  • Aluminum upper deck
  • Servo saver
  • Printed camouflage body
  • Charger and NiMH Racing Pack included

In The Box / Required

In the Box

  • 1/10 EP Sand Buggy ASB1
  • 2.4ghz Transmitter
  • 7.2v Battery Pack
  • Plug Charger
  • Manual

 

Required to Run

  • 4x AA bateries

Specification

Filters
  • Assembly
    RTR (Ready to Run)
  • Power
    Brushed
  • Scale
    1/10
  • Drive
    4WD

FAQ

Reviews (3)

Write a review

Rate product out of 5

Spare Parts

Compatible Hop-Ups

Q & A

Questions3 Answers3 | Expand All
What are the measurements
L/W/H
Bertie
  • Hi Bertie, 

    Thank you for your question. The measurements for this vehicle are (L x W x H): 425 x 285 x 150mm.

    Kind regards

    Laurel
    Was this answer helpful?0
Is this a kit or pre built car
Andy
  • Hi Andy,

    Thank you for your question. 

    I can confirm that this car is pre-built.

    Kind regards

    Laurel
    Was this answer helpful?0
is this ok to drive on sand or will the sand damage the parts/motor?
Anonymous
  • Hi Milo

    The Absima Sand buggy is designed to be used off-road so it should be fine using  it over sand. However when packing up we recommend you to give the buggy a good clean to make sure no sand is in the motor or gears.

    Thanks

    Alex
    Was this answer helpful?0
Showing 1 to 3 of 3 (1 pages)