Makerfire Armor67 BNF Micro Brushless FPV Drone DSM2

  • £119.99 inc VAT

  • £149.99 save £30.00
  • £119.99 inc VAT

  • £149.99 save £30.00
Includes Free UK Delivery
FINANCE AVAILABLE FOR ORDERS OVER £280 Show Finance Options
Includes Free UK delivery
Makerfires TinyWhoop's have been extremely popular over the winter seasons allowing you to get your FPV fix while being indoors. MakerFire have now released their Armor67 and Armor90 both being brushless TinyWhoop's they have more power and more speed to allow you to get that FPV racer fix.

More Power, More Speed

The Armor67 is a BNF indoor racing drone with draw-dropping flight performance. Improving on Makerfires brushed TinyWhoop the Armor67 keeps the smaller "tiny" form factor but with a much needed power and performance boost. Being a full carbon fibre frame with carbon fibre prop guards this allows it to be one of the best indoor FPV drones.

live in the moment

Powered by F3

MakerFires F3 board comes with default settings to allow you to get the Armor67 flying within minutes, however for the FPV enthusiast the Minicube F3 board allows you to fully customise the flight characteristics, flight styles, stick inputs and more to allow you to get the best performance and flight styles to suit the way you fly using Betaflights configuration software. The Minicube F3 board has built in DSM2 allowing you to easily bind your Spektrum transmitter to control the Armor67.

live in the moment

Brushless Electronics

The Armor67 comes packed with the newest 4in1 10A Mini ESC with LDO function and support for Oneshot/Dshot300 which are connected to Makerfire 1103 10000KV brushless motors that allow you to get more power and performance than other brushed TinyWhoops. To power this little power house of a TinyWhoop is a 400mAh 2s LiPo battery that allows you to get around a 5 minute flight time. Here at RC Geeks we recommend purchasing a couple of extra batteries to allow you to have the best FPV experience without having to wait for batteries to charge.

live in the moment

Everything you need

The Armor67 is a BNF craft meaning that it comes with almost everything you need to get in the air and get flying including the battery, Charger and all the hardware and accessories that are needed to get the Armor67 in the air. The Armor67 also comes with a built in OSD that uses the F3 MCU, which has been included in BETAFLIGHT_OMNIBUS. As well as having a built in OSD, and a 25 mw 600TVL camera transmission system which has a wide angle camera to allow you to be able to get the best FPV experience.

live in the moment

Description

Makerfires TinyWhoop's have been extremely popular over the winter seasons allowing you to get your FPV fix while being indoors. MakerFire have now released their Armor67 and Armor90 both being brushless TinyWhoop's they have more power and more speed to allow you to get that FPV racer fix.

More Power, More Speed

The Armor67 is a BNF indoor racing drone with draw-dropping flight performance. Improving on Makerfires brushed TinyWhoop the Armor67 keeps the smaller "tiny" form factor but with a much needed power and performance boost. Being a full carbon fibre frame with carbon fibre prop guards this allows it to be one of the best indoor FPV drones.

live in the moment

Powered by F3

MakerFires F3 board comes with default settings to allow you to get the Armor67 flying within minutes, however for the FPV enthusiast the Minicube F3 board allows you to fully customise the flight characteristics, flight styles, stick inputs and more to allow you to get the best performance and flight styles to suit the way you fly using Betaflights configuration software. The Minicube F3 board has built in DSM2 allowing you to easily bind your Spektrum transmitter to control the Armor67.

live in the moment

Brushless Electronics

The Armor67 comes packed with the newest 4in1 10A Mini ESC with LDO function and support for Oneshot/Dshot300 which are connected to Makerfire 1103 10000KV brushless motors that allow you to get more power and performance than other brushed TinyWhoops. To power this little power house of a TinyWhoop is a 400mAh 2s LiPo battery that allows you to get around a 5 minute flight time. Here at RC Geeks we recommend purchasing a couple of extra batteries to allow you to have the best FPV experience without having to wait for batteries to charge.

live in the moment

Everything you need

The Armor67 is a BNF craft meaning that it comes with almost everything you need to get in the air and get flying including the battery, Charger and all the hardware and accessories that are needed to get the Armor67 in the air. The Armor67 also comes with a built in OSD that uses the F3 MCU, which has been included in BETAFLIGHT_OMNIBUS. As well as having a built in OSD, and a 25 mw 600TVL camera transmission system which has a wide angle camera to allow you to be able to get the best FPV experience.

live in the moment

In The Box / Required

In the Box

  • Armor67
  • 2x 1535 4 blade propeller sets
  • Lipo battery charger cable 
  • Lipo battery
  • 4x Rubber band 
  • Cross screwdriver

Required to Run

  • DSM2 Compatible Transmitter

FAQ

Reviews (0)

Write a review

Rate product out of 5

Compatible Hop-Ups

Viewing of 1
Makerfire 300mAh 2s Lipo battery

Makerfire 300mAh 2s Lipo battery

£2.99
£7.99 save £5.00

Q & A

Be the first to ask a question.