3Racing Sakura D4 RWD Drift Car Kit

  • £109.00 inc VAT

  • £109.00 inc VAT

Includes Free UK Delivery
FINANCE AVAILABLE FOR PRODUCTS OVER £500 Show Finance Options
Includes Free UK delivery
Staff Profile Image

Expert Opinion Matt [Engineer]

Building on the success of the Sakura D3, 3Racing are back with another affordable chassis. These kits were designed for drfiting from the ground up and thus offer adjustability for camber, caster and much more. When setup the RWD chassis is ideal for seasoned drifters. Prefer an all-wheel-drive experience? The 3Racing Sakura D4 is also available as a AWD drift chassis here.

Fantastic Chassis Design

Effectively 'mid' mounted, the motor fits just forward of the rear wheels, whilst the battery can be either mid-mounted or hung over the rear diffuser depending on the drivers preference for weight balance . Adjustable Y arm front suspension allows for extreme camber and the lower arms allow for 15 degrees of front caster. 65 degree ultra-wide-angle driveshafts are employed to keep the wheels spinning at these extreme angles. All four 55mm suspension struts feature oil dampers, the bodies threaded for adjustment. The kit is finished with satin gold twin-spoke wheels pre-mounted with high performance drift tyres.

product detail

Also Available : Sakura D4 Chassis - also available in All-Wheel-Drive layout Check it out here

Electronics not included

A chassis kit, the D4 does not feature any power, control or transmission equipment. At a bare minimum you will need a 2-Channel radio system (transmitter and reciever), battery and charger, motor and speed controller plus a steering servo. This is on top of screw drivers and allen wrenches. All of this is available on our store but feel free to contact a sales advisor if you are new to the hobby and they will be happy to guide you through what is required.

product detail

Requires Construction

Note that this is a chassis kit so will require construction, which many will see as half of the fun. An experienced builder can easily have it up and running in a day.

Rather spend your time drifting than building but still want a highly-adjustable chassis? The RWD D4 is also available factory built! Like the base chassis kit, this will still require motor, speed controller and other electronics, but it can get you up and drifting much quicker.

product detail

Learn more on our Blog

3Racing's Sakura line of RC drift chassis have long been a favourite here at RC Geeks. As such we have several blogs featuring builds and setups of the AWD kit as well as the older chassis. See our blog below for more details.

Sakura D4 AWD Build Blog View all Sakura Blogs

Pimp your Ride

3Racing offer a wide selection of spares and hop ups for the chassis. Indeed the availablility of such parts is what initially attracted us to the manufacturer. From solid rear axles, gear sets, motor coolers, to aluminium battery trays, there are Sakura hop-ups for your needs.

product detail

Description

Staff Profile Image

Expert Opinion Matt [Engineer]

Building on the success of the Sakura D3, 3Racing are back with another affordable chassis. These kits were designed for drfiting from the ground up and thus offer adjustability for camber, caster and much more. When setup the RWD chassis is ideal for seasoned drifters. Prefer an all-wheel-drive experience? The 3Racing Sakura D4 is also available as a AWD drift chassis here.

Fantastic Chassis Design

Effectively 'mid' mounted, the motor fits just forward of the rear wheels, whilst the battery can be either mid-mounted or hung over the rear diffuser depending on the drivers preference for weight balance . Adjustable Y arm front suspension allows for extreme camber and the lower arms allow for 15 degrees of front caster. 65 degree ultra-wide-angle driveshafts are employed to keep the wheels spinning at these extreme angles. All four 55mm suspension struts feature oil dampers, the bodies threaded for adjustment. The kit is finished with satin gold twin-spoke wheels pre-mounted with high performance drift tyres.

product detail

Also Available : Sakura D4 Chassis - also available in All-Wheel-Drive layout Check it out here

Electronics not included

A chassis kit, the D4 does not feature any power, control or transmission equipment. At a bare minimum you will need a 2-Channel radio system (transmitter and reciever), battery and charger, motor and speed controller plus a steering servo. This is on top of screw drivers and allen wrenches. All of this is available on our store but feel free to contact a sales advisor if you are new to the hobby and they will be happy to guide you through what is required.

product detail

Requires Construction

Note that this is a chassis kit so will require construction, which many will see as half of the fun. An experienced builder can easily have it up and running in a day.

Rather spend your time drifting than building but still want a highly-adjustable chassis? The RWD D4 is also available factory built! Like the base chassis kit, this will still require motor, speed controller and other electronics, but it can get you up and drifting much quicker.

product detail

Learn more on our Blog

3Racing's Sakura line of RC drift chassis have long been a favourite here at RC Geeks. As such we have several blogs featuring builds and setups of the AWD kit as well as the older chassis. See our blog below for more details.

Sakura D4 AWD Build Blog View all Sakura Blogs

Pimp your Ride

3Racing offer a wide selection of spares and hop ups for the chassis. Indeed the availablility of such parts is what initially attracted us to the manufacturer. From solid rear axles, gear sets, motor coolers, to aluminium battery trays, there are Sakura hop-ups for your needs.

product detail

In The Box / Required

In the Box

  • 3Racing Sakura D4 RWD Kit
  • Detailed Instructions

Required to Run

  • Radio Gear
  • Battery & Charger
  • Motor
  • Speed Controller
  • Servo

Specification

MODELS
  • Scale
    1/10
  • Assembly
    Kit
  • Surface Type
    On-Road

FAQ

Reviews (3)

Write a review

Rate product out of 5

Videos

Spare Parts

Compatible Hop-Ups

Q & A

Be the first to ask a question.